機架前後可裝設壓克力門，鋁門，強化玻璃門或蜂巢式通風孔門，另側板可裝可拆式，或安裝開啟式門組，四面皆可拆卸以利機架之維修或多台機架之串聯。
　　
機架之活動鋁柱：為可前後移動之方式，可因設備之把手，不同跳接線材之旋轉需求，而任意作無段式移動。
　　
為配合儀器架內線路使用空間，標準型機架，機箱寛度為600m/m，加寛型機架寬度加寛至800m/m，而內部活動鋁柱則維持19寬度不變，且兩者之活動鋁柱可依需求作前後及左右調整。


A choice of a perforated, tempered glass door or an acrylic door is available for both the front and rear of the rack.

Flexible vertical rails can be set at the front or back of the rack to meet the actual terminal wiring needs.

The 19” Standard  rack has a width of 600 mm. 
For intranet office networking systems that need a larger size, the 800mm 19”  Extra-wide rack us available.
Both of the units maintain 19”  standard size.

機架本身採組合式之鋁擠型柱或實心直角三向接頭成，其材質為AL6063T5，下方可加裝煞車輪及地平螺絲，上蓋板上加裝靜音風扇組，使內部設備到達真正循環作用，散墊快。
　　
各門組皆附有隱藏式門鎖，前後門框開啟角度為115度，內部支架可內縮，採陽極處理或粉體烤漆。
　　
機架全部採熱硬化粉體塗裝以防設備刮傷，氧化，可抗強酸、 強鹼，延長設備壽命或採靜電液塗裝烤漆。


The main vertical rails of the rack are made with squeeze-cast aluminum pillars. The device can be set Castor or on a floor stand. Catch Nuts installed in the main vertical rails allow users to adjust the unit up or down according to the position of the rack-mount chassis. Top cover with fan unit to help the ventilation of  equipment.

A hidden key lock or combination lock or combination lock is optional for the rack.

This rack is powder coated  to fight against rust, oxidization, scrapes, acids, alkali erosion, and lacquer peeling.
An acrylic front door with a lock and a 6-way socket strip with 30 set panel screws come standard.